TensorGrip X40 Acoustic Panel Adhesive (22L)
TensorGrip® X40 is developed in conjunction with the acoustic industry for all acoustic panel bonding applications. TensorGrip® X40 is a fast drying contact adhesive, suitable for all types of acoustic panel installation and applications including in-house and on-site bonding processes. Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.
Developed For: Acoustic Panel Installation. Brick, Concrete, Plasterboard/Drywall, Insulation, MDF.
Advantages:
- Non-Flammable adhesive
- Low VOC
- Excellent high coverage
- 80% of final strength achieved immediately upon bonding
- Full strength achieved in 24 hours, high strength long-term bond
- Open time allows for repositionability for panel alignment prior to bonding
- Can be tinted for visability of application coverage
- Fast drying 3-4 mins with excellent initial green strength bond
- High tack – adheres aggressively to nearly any surface
- Long open time 45-60 mins
- High (105°C) temperature heat resistant
- Low odour – suitable for Building Sites
- Low atomisation limiting overspray
- Portable airless self sufficient aerosol canister spray
- System with adjustable spray patterns
Technical Data:
- 22L Portable Canister (17kg Net Weight)
- Coverage Rate: 10.5m²/Litre (230m2 spray out area/115m2 of finished bonded product)
- Total Solids: 21-27%
- VOC Content: 70.0 g/L
- System Flammability: Non-Flammable Adhesive; Flammable (2) Propellant
- Solvent System: Methylene Chloride
- Dry Time: 3-5 mins (depending on temp. & humidity)
- Open Time: Long
- Heat Resistance: High >105°C
- Recommended Nozzle Tip: 8002
Contains Methylene Chloride - Also known as Dichloromethane (DCM) and dichloride.
For information and advice on the safe handling, first aid, storage and disposal of chemical products, users must refer to the most recent Safety Data Sheet (SDS).