Skip to Content
  1. All products
  2. Adhesives
  3. TensorGrip X40 Acoustic Panel Adhesive (22L)
  4. Adhesives

TensorGrip X40 Acoustic Panel Adhesive (22L)

TensorGrip X40 Acoustic Panel Adhesive Canister (22L) | Soundproofing Glue | Sydney & Australia Wide Delivery
DG T6
$ 592.90 $ 592.90

$ 592.90 / Drum
Add 4 more Drum(s) to get price $559.90 per Drum(s) - Save $33.00 / Drum(s)
Add to cart
Contact Us

TensorGrip® X40 is developed in conjunction with the acoustic industry for all acoustic panel bonding applications. TensorGrip® X40 is a fast drying contact adhesive, suitable for all types of acoustic panel installation and applications including in-house and on-site bonding processes. Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.

Developed For: Acoustic Panel Installation. Brick, Concrete, Plasterboard/Drywall, Insulation, MDF.

Advantages:

  • Non-Flammable adhesive
  • Low VOC
  • Excellent high coverage
  • 80% of final strength achieved immediately upon bonding
  • Full strength achieved in 24 hours, high strength long-term bond
  • Open time allows for repositionability for panel alignment prior to bonding
  • Can be tinted for visability of application coverage
  • Fast drying 3-4 mins with excellent initial green strength bond
  • High tack – adheres aggressively to nearly any surface
  • Long open time 45-60 mins
  • High (105°C) temperature heat resistant
  • Low odour – suitable for Building Sites
  • Low atomisation limiting overspray
  • Portable airless self sufficient aerosol canister spray
  • System with adjustable spray patterns

Technical Data:

  • 22L Portable Canister (17kg Net Weight)
  • Coverage Rate: 10.5m²/Litre (230m2 spray out area/115m2 of finished bonded product)
  • Total Solids: 21-27%
  • VOC Content: 70.0 g/L
  • System Flammability: Non-Flammable Adhesive; Flammable (2) Propellant
  • Solvent System: Methylene Chloride
  • Dry Time: 3-5 mins (depending on temp. & humidity)
  • Open Time: Long
  • Heat Resistance: High >105°C
  • Recommended Nozzle Tip: 8002

 

Contains Methylene Chloride - Also known as Dichloromethane (DCM) and dichloride.


For information and advice on the safe handling, first aid, storage and disposal of chemical products, users must refer to the most recent Safety Data Sheet (SDS).

Quantity Price Breaks

Quantity Unit Price Discount
1+ $ 592.90 -
5+ $ 559.90 $ 33.00 (5.6%)

Frequently Asked Questions

5 questions about this product

Methylene Chloride is a heavy, highly volatile solvent classified as a suspect carcinogen. Exposure can cause immediate dizziness, nausea, confusion, and respiratory irritation. Long-term exposure poses severe chronic health risks.

Standard dust masks or basic carbon filters are completely ineffective. You legally require an AS/NZS 1716 approved respirator explicitly rated for chlorinated solvents, alongside safety goggles and chemical-resistant gloves (standard thin nitrile will degrade rapidly).

They are older, highly traditional formulations valued for their rapid tack time, non-flammable liquid properties, and incredible grab on tricky upholstery materials. However, their strict health hazards require rigid safety controls.

No. Methylene Chloride vapours are heavier than air and quickly collect at floor level or in stagnant corners. They must only be used in heavily ventilated areas or industrial spray setups with specialized extraction systems.

Because of the high toxicity, these models are strictly recommended for experienced, professional trade environments where proper safety equipment, workspace extraction, and safe chemical handling training are fully established.