Skip to Content
  1. All products
  2. Adhesives
  3. TensorGrip T65 Hi-Temp Headlining Adhesive (22L)
  4. Adhesives

TensorGrip T65 Hi-Temp Headlining Adhesive (22L)

TensorGrip T65 Headlining Adhesive Canister (22L) | Extreme High Temp | Sydney & Australia Wide Delivery
DG T6
$ 592.90 $ 592.90

$ 592.90 / Drum
Add 4 more Drum(s) to get price $566.50 per Drum(s) - Save $26.40 / Drum(s)
Add to cart
Contact Us

TensorGrip® T65 Has been designed specifically for bonding auto headliners in Australian conditions. It has an extremely high temperature resistance of 120°C so headliners will holdfast in the most brutal hot weather. Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.

Developed For: Automotive trim headliners. Foam, Fabric, Leather, Plastic, MDF.

Advantages:

  • Quick drying with an extended open time
  • High solids formula
  • Excellent bond strength
  • Low odour
  • Excellent high coverage
  • Airless spray
  • Portable and convenient

Technical Data:

  • 22L Portable Canister (17kg Net Weight)
  • Coverage Rate: 10.0m²/Litre (220m2 spray out area/110m2 of finished bonded product)
  • Total Solids: 24.2%+/-2%
  • Viscosity: 180 cps
  • System Flammability: Non-flammable adhesive in flammable propellant
  • Dry Time: 1-3 mins (depending on temp. & humidity)
  • Open Time: Long
  • Heat Resistance: Very High >120°C
  • Recommended Nozzle Tip: 6501

 

Contains Methylene Chloride - Also known as Dichloromethane (DCM) and dichloride.


For information and advice on the safe handling, first aid, storage and disposal of chemical products, users must refer to the most recent Safety Data Sheet (SDS).

Quantity Price Breaks

Quantity Unit Price Discount
1+ $ 592.90 -
5+ $ 566.50 $ 26.40 (4.5%)

Frequently Asked Questions

5 questions about this product

Methylene Chloride is a heavy, highly volatile solvent classified as a suspect carcinogen. Exposure can cause immediate dizziness, nausea, confusion, and respiratory irritation. Long-term exposure poses severe chronic health risks.

Standard dust masks or basic carbon filters are completely ineffective. You legally require an AS/NZS 1716 approved respirator explicitly rated for chlorinated solvents, alongside safety goggles and chemical-resistant gloves (standard thin nitrile will degrade rapidly).

They are older, highly traditional formulations valued for their rapid tack time, non-flammable liquid properties, and incredible grab on tricky upholstery materials. However, their strict health hazards require rigid safety controls.

No. Methylene Chloride vapours are heavier than air and quickly collect at floor level or in stagnant corners. They must only be used in heavily ventilated areas or industrial spray setups with specialized extraction systems.

Because of the high toxicity, these models are strictly recommended for experienced, professional trade environments where proper safety equipment, workspace extraction, and safe chemical handling training are fully established.