Skip to Content
  1. All products
  2. Adhesives
  3. TensorGrip L32 Super Strength Adhesive (22L)
  4. Adhesives

TensorGrip L32 Super Strength Adhesive (22L)

TensorGrip L32 Super Strength Contact Adhesive Canister (22L) | Multi-Purpose Bonding | Sydney & Australia Wide Delivery
DG T6
$ 599.50 $ 599.50

$ 599.50 / Drum
Add 4 more Drum(s) to get price $570.90 per Drum(s) - Save $28.60 / Drum(s)
Add to cart
Contact Us

TensorGrip® L32 is a High Strength Contact Adhesive designed for multi purpose laminating. It also works well on edging and smooth surfaces such as metal and melamine. Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.

Developed For: FRL, FRP/GRP, Metal/Aluminum Sheeting, Standard Laminate

Advantages:

  • Quick drying with an extended open time
  • High solids formula
  • Excellent bond strength
  • Low odour
  • Excellent high coverage

Technical Data:

  • 22L Portable Canister (17kg Net Weight)
  • Coverage Rate: 10.5m²/Litre (230m2 spray out area/115m2 of finished bonded product)
  • Total Solids: 24.2%+/-2%
  • Viscosity: 180 cps
  • System Flammability: Non-flammable adhesive in flammable propellant
  • Dry Time: 1-3 mins (depending on temp. & humidity)
  • Open Time: Long
  • Heat Resistance: Regular
  • Recommended Nozzle Tip: 6501

 


For information and advice on the safe handling, first aid, storage and disposal of chemical products, users must refer to the most recent Safety Data Sheet (SDS).

Quantity Price Breaks

Quantity Unit Price Discount
1+ $ 599.50 -
5+ $ 570.90 $ 28.60 (4.8%)

Frequently Asked Questions

5 questions about this product

Methylene Chloride is a heavy, highly volatile solvent classified as a suspect carcinogen. Exposure can cause immediate dizziness, nausea, confusion, and respiratory irritation. Long-term exposure poses severe chronic health risks.

Standard dust masks or basic carbon filters are completely ineffective. You legally require an AS/NZS 1716 approved respirator explicitly rated for chlorinated solvents, alongside safety goggles and chemical-resistant gloves (standard thin nitrile will degrade rapidly).

They are older, highly traditional formulations valued for their rapid tack time, non-flammable liquid properties, and incredible grab on tricky upholstery materials. However, their strict health hazards require rigid safety controls.

No. Methylene Chloride vapours are heavier than air and quickly collect at floor level or in stagnant corners. They must only be used in heavily ventilated areas or industrial spray setups with specialized extraction systems.

Because of the high toxicity, these models are strictly recommended for experienced, professional trade environments where proper safety equipment, workspace extraction, and safe chemical handling training are fully established.