TensorGrip L31 Mist-Pebble Fine Spray Adhesive (22L)
TensorGrip® L31 is suitable for bonding HPL to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. TensorGrip® L31 is designed for permanent bonding of materials where immediate bond strength and high heat resistance are required. TensorGrip® L31 can also be used for bonding sheet metals, where surface preparation is very important – surface must be degreased and lightly abraded with fine abrasive or non-woven material. ALWAYS test TensorGrip® L31 to determine suitability for your particular application prior to use in production. NOT RECOMMENDED for use with plasticised vinyls, flexible plastics, expanded/extruded polystyrene, PE or PP. Suitable for many postforming applications using most types of postforming equipment. Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.
Developed For: Designed to bond gloss and standard laminates and can be used for Postforming. High Gloss/Def Laminate, Standard Laminate, Veneers.
Advantages:
- Fast Drying
- Good Heat Resistance
- High Solids
- Suitable for Post-Forming
- Easy Application Control
- Hi-Performance Neoprene-based Resin
- Portable and convenient
Technical Data:
- 22L Portable Canister (17kg Net Weight)
- Coverage Rate: 10.9m²/Litre (240m2 spray out area/120m2 of finished bonded product)
- Total Solids: 27%
- System Flammability: Flammable adhesive in flammable propellant
- Dry Time: 1-2 mins (depending on temp. & humidity)
- Open Time: 30 mins
- Heat Resistance: High >115°C (25mm/100gram)
- Recommended Nozzle Tip: 4001 tip with Pizzler insert
PLEASE NOTE: Freight surcharges may apply - UN3501 (Hazardous Goods Classification).
For information and advice on the safe handling, first aid, storage and disposal of chemical products, users must refer to the most recent Safety Data Sheet (SDS).