Skip to Content
  1. All products
  2. Adhesives
  3. TensorGrip L17 General Purpose Laminate Adhesive (22L)
  4. Adhesives

TensorGrip L17 General Purpose Laminate Adhesive (22L)

TensorGrip L17 Hi-Temp Laminate Contact Adhesive Canister (22L) | HPL Spray Glue | Sydney & Australia Wide Delivery
DG T6
$ 570.90 $ 570.90

$ 570.90 / Drum
Add 4 more Drum(s) to get price $544.50 per Drum(s) - Save $26.40 / Drum(s)
Add to cart
Contact Us

TensorGrip® L17 is a high performance contact adhesive with a unique resin formula which creates a tough and resilient bond line between decorative surface materials and all common wood substrates. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required. TensorGrip® L17 can also be used for bonding sheet metals, where surface preparation is very important – surface must be degreased and lightly abraded with fine abrasive or non-woven material. Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.

Developed For: Decorative surface materials and all common wood substrates. FRL, FRP/GRP, Standard Laminate, Metal/Aluminum Sheeting etc

Advantages:

  • Fast drying with long open time
  • Fast High Tack
  • Excellent High Coverage
  • 80% of final strength achieved immediately
  • Full strength achieved in 24 hours
  • Excellent green strength and high heat resistance
  • High Temp Resistance - 120°C
  • High Solids
  • Easy Application Control
  • Class 1 Fire Rating
  • BS 6222 Bond Strength Approval
  • No ODS (Ozone Depleting Substances)
  • Portable and convenient

Technical Data:

  • 22L Portable Canister (17kg Net Weight)
  • Coverage Rate: 10.5m²/Litre (230m2 spray out area/115m2 of finished bonded product)
  • Total Solids: 22-28%
  • VOC Content: 161g/L
  • System Flammability: Non-Flammable Adhesive; Flammable Propellant
  • Solvent System: Methylene Chloride
  • Dry Time: 2-4 mins (depending on temp. & humidity)
  • Open Time: Long
  • Heat Resistance: High >120°C
  • Recommended Nozzle Tip: 6501

 

PLEASE NOTE: Freight surcharges may apply - UN3501 (Hazardous Goods Classification).


For information and advice on the safe handling, first aid, storage and disposal of chemical products, users must refer to the most recent Safety Data Sheet (SDS).

Quantity Price Breaks

Quantity Unit Price Discount
1+ $ 570.90 -
5+ $ 544.50 $ 26.40 (4.6%)

Frequently Asked Questions

5 questions about this product

Methylene Chloride is a heavy, highly volatile solvent classified as a suspect carcinogen. Exposure can cause immediate dizziness, nausea, confusion, and respiratory irritation. Long-term exposure poses severe chronic health risks.

Standard dust masks or basic carbon filters are completely ineffective. You legally require an AS/NZS 1716 approved respirator explicitly rated for chlorinated solvents, alongside safety goggles and chemical-resistant gloves (standard thin nitrile will degrade rapidly).

They are older, highly traditional formulations valued for their rapid tack time, non-flammable liquid properties, and incredible grab on tricky upholstery materials. However, their strict health hazards require rigid safety controls.

No. Methylene Chloride vapours are heavier than air and quickly collect at floor level or in stagnant corners. They must only be used in heavily ventilated areas or industrial spray setups with specialized extraction systems.

Because of the high toxicity, these models are strictly recommended for experienced, professional trade environments where proper safety equipment, workspace extraction, and safe chemical handling training are fully established.