Skip to Content
  1. All products
  2. Adhesives
  3. TensorGrip F31 Hi-Temp Foam & Upholstery Adhesive (22L)
  4. Adhesives

TensorGrip F31 Hi-Temp Foam & Upholstery Adhesive (22L)

TensorGrip F31 Hi-Temp Upholstery Adhesive Canister (22L) | Heat Resistant Spray Glue | Australia Wide Delivery
DG T6
$ 460.90 $ 460.90

$ 460.90 / Drum
Add 4 more Drum(s) to get price $427.90 per Drum(s) - Save $33.00 / Drum(s)
SKU: ADH-CANIS-F31
Add to cart
Contact Us

TensorGrip® F31 is a high performance spray adhesive developed for demanding foam, fabric, leather and upholstery applications. Its tough curing properties and high temperature resistance gives ultra-strong bond adhesion when working in high demand, bespoke upholstery applications, ensuring longevity and excellent, integral bond results. Being in a pressurised canister makes it super portable and less noisy vs using the traditional spray gun pot and air compressor.

Developed For: Bonding to soft substrates - fabric, thin fabric, foam and synthetic leather applications.

Advantages:

  • Exceptional, Tough Curing Bond Times
  • High Temperature Resistance
  • Fine Web Spray Pattern Reducing Bleed Through on Thin Fabrics
  • Highly Controllable Spray Pattern for Varying Surface Areas
  • Excellent Green Strength and Low Odour
  • Portable and convenient

Technical Data:

  • 22L Portable Canister (17kg Net Weight)
  • Coverage Rate: 10.5m²/Litre (230m2 spray out area/115m2 of finished bonded product)
  • Total Solids: 28%-30%
  • System Flammability: Non-flammable adhesive solution in flammable propellant
  • Dry Time: 1-2 mins dependant on temp & humidity
  • Open Time: 30 mins
  • Heat Resistance: High >118°C (25mm/100gram)
  • Recommended Nozzle Tip: 6501

 

Contains Methylene Chloride - Also known as Dichloromethane (DCM) and dichloride.


For information and advice on the safe handling, first aid, storage and disposal of chemical products, users must refer to the most recent Safety Data Sheet (SDS).

Quantity Price Breaks

Quantity Unit Price Discount
1+ $ 460.90 -
5+ $ 427.90 $ 33.00 (7.2%)

Frequently Asked Questions

5 questions about this product

Methylene Chloride is a heavy, highly volatile solvent classified as a suspect carcinogen. Exposure can cause immediate dizziness, nausea, confusion, and respiratory irritation. Long-term exposure poses severe chronic health risks.

Standard dust masks or basic carbon filters are completely ineffective. You legally require an AS/NZS 1716 approved respirator explicitly rated for chlorinated solvents, alongside safety goggles and chemical-resistant gloves (standard thin nitrile will degrade rapidly).

They are older, highly traditional formulations valued for their rapid tack time, non-flammable liquid properties, and incredible grab on tricky upholstery materials. However, their strict health hazards require rigid safety controls.

No. Methylene Chloride vapours are heavier than air and quickly collect at floor level or in stagnant corners. They must only be used in heavily ventilated areas or industrial spray setups with specialized extraction systems.

Because of the high toxicity, these models are strictly recommended for experienced, professional trade environments where proper safety equipment, workspace extraction, and safe chemical handling training are fully established.