Headlining Velour - Plain Finish
Buy Headlining Velour - Plain Finish | Australia
|Download PDF Document||headliner velour colour chart.pdf|
This "plain" foam backed brush nylon material is the No. 1 choice for official after market car headlining velour replacement. It is Touch Tape (Velcro) reactive, and also used in display application. Our automotive roof lining velour features an open weave backing material with excellent two-way stretch for awkward shapes and surfaces.
Can be purchased cut length by the metre or by the roll (25m roll).
When replacing your roof lining in an automotive or marine application be sure to use a high temperature resistant adhesive. We sell and recommend the BOND-IT™ Contact Adhesive (Hard Surfaces).
You will generally need 2 metres of material to complete a headliner for a standard sized sedan.
Handy Tip: When gluing your automotive velour material to the car headliner, be sure to spray both surfaces with the adhesive for better results. More instructions can be found on the aerosol can.
For larger quantity orders and bulk discounts, please contact us directly
Free sample cuttings available on request.
PLEASE NOTE: The colour shown should be considered a close rendition to the actual colour available and cannot be 100% accurate as each computer’s monitor settings may vary.